My English| Weibo| Chinese Welcome to our website!
Tel:+0086-21-62288709

Hot keywords: bray valve lowara water pump tuthill blower spencer blower sika instrument

煜柯新闻中心
当前位置:Home » Q&A » Which wires shall we use in the control cables?

Which wires shall we use in the control cables?

管理员:煜科管理
人气:760发表时间:2017-08-18 16:35

A. in general control cable, there are 5 wire blue, black, brown, grey and white.For analog signal control, the brown and black wires are connected to the negative electrode, and the blue wire is connected to the positive pole of the signal.White and gray wires are notused.Note: if you use remote suspension, the brown wire and black lead should be connected by an intermediate relay or switch. 

B. Control the contact signal, connecting the brown and black wires to the signal end, connecting the white lead to the other end of the signal.(the contact signal control meter is a typical application)


Relevant news

Manager:

Assister:

Assister: